3558M

Industrial vacuum suitable to collect large quantity of powders, even the finest ones, equipped with a filtering chamber of big dimensions and with a filter of large surface.The new model is equipped with pre set components able to drive the optional. The available kits, make the machine modular

The vacuum is made of four basic parts: chassis, filter chamber, waste bin, motor housing. The side channel suction unit, is fitted at the base of the chassis, giving more stability to the machine. The impeller is directly driven, thus avoiding any transmission and maintenance. The special diffuser decreases the speed of the exhaust air to less than 1m/s, in compliance with European regulations EN 60335 2 69. The magneto-thermal on/off switch, powered by a 9m electric cable, is located into the rear housing. In the same place, a vacuum gauge which, monitors filtration efficiency is located. The vac is fitted with a external manual filter shaker, located on the side of the machine, easy to use and ergonomic. The greater filter surface is obtained by means of a polyester star filter with a surface of 3,5 m². In presence of toxic powders, a further ULPA (Ultra Low Penetration Air) filter can be fitted, assuring a filtration with a 99,9995% efficiency @ 0,18 µm, tested by the MPPS method (Most Penetrating Particle Size), according to EN 1822 regulations, located after the suction unit. The material is recovered inside a 80 l painted steel bin, provided with castors, easy to remove thanks to a handy release system. The machine frame is made of heavy duty tubular and plate steel, painted with epoxy powders to ensure robustness and is provided with a tool basket and cable holder The tangential inlet allows a better cyclonic effect in presence of fine dusts. For better protection of the filter chamber in presence of abrasive materials, a reinforcement shield is fitted on the standard model. The manoeuvrability of the vacuum is granted by two fixed wheels (Ø 200 mm) and by two swivel wheels Ø 150 mm)provided with brakes and fitted with bearings.

• Password: Modularity
• Designed to increase the productivity
• Wet & dry applications
• Side channel blower
• Stainless steel versions available
• Large primary filter